|
Promatch® to pattern (BS 6250 Compliant)
| Information Panel
|
| Properties |
- Best Pigmented A/C System on the market
- Top quality melamine based resin formulation
- Excellent Opacity. High Solids, reduces coats
required
- Easily re-coatable
|
| Uses |
Interior joinery &
furniture |
| Topcoat |
AC2 Promatch to Pattern
AC2 Promatch Metallic
AC2 Promatch Textured
AC2 Promatch SPECIAL to Pattern
AC2 Black & White |
| Basecoat |
AC2 Promatch Primer Filler
(Compliant)
AC2 Black MDF Primer Filler (Fast Dry)
AC2 Charcoal Primer Filler (Compliant)
AC2 Grey Primer Filler (Compliant)
AC2 White Primer Filler (Compliant) |
| Thinners |
ACT Standard Thinners
ACT Fast Dry Thinners
ACT Anti-Bloom Retarding Thinners |
| Cleaning |
ISF Spray Gun Cleaner |
| Equipment |
Conventional airless
/ airmix or HVLP spray equipment |
| Direction
for Use |
- Catalyst Mix Ratio: Mix 9 Parts AC2 Part A
with 1 Part AC2 Catalyst
- Apply a light coat of AC2 Primer, allow to
dry, de-nib & apply another sealer coat
as necessary
- Then after a further de-nib apply a full
even coat of the AC2 Top Coat
- Once catalysed, thinners are not normally
necessary, however ACT thinners may be used
if required up to a maximum of 10% by volume
- Allow to dry overnight prior to packing
- AC2 should not be used over the pre-catalysed
products
|
| Note |
Some low pigmented top-coats
may not reach VOC compliancy due to the nature of
the shades - please check with our technical department
for clarification. Please ensure that the total
system film thickness (DFT) does not exceed 150
microns. Always lightly sand between coats to assist
adhesion. Maximum 2 coats in any 8 hours. |
| Drying
Times |
Touch Dry in 10-15 minutes,
recoat time 60 minutes |
| Max Resistance
|
7 days |
| Coverage |
5-9 square metres per
litre |
| Mix Ratio
|
2 Part 9:1 |
| Shelf
Life |
12 months |
| Pack
Size |
1 litre, 5 litres &
25 litres |
|
